Craftsman CompuCarve 133.217540 Instrukcje Operacyjne Pobierz pdf (Strona 85)

Chapter 9: Bits & Bit Selection

Drill Tool

The drill tool provides a quick way to create holes. To create a hole select the drill tool from the tools pull down

menu or toolbar. Then left click the point on the board where you want the hole and a dialog will open. Enter

the diameter of the hole and then select “Through the Board” or press the button to enter a depth.

Figure 9�4� Drill Tool

icon

Figure 9�5� Drill Tool Dialog

Once a hole has been applied the diameter may be changed in the diameter Entry Box on the Input Toolbar. If

the hole was not through the board the depth can be changed in the Depth Entry Box on the Input Toolbar. The

position of the hole can be manipulated in the same way as other patterns.

Edge Rout

Edge Rout is a quick tool to apply a rout on all edges of a board. It is not possible to pick and choose which

sides will have the rout applied to it or not. To apply an edge rout select ‘Edge Rout’ from the ‘Tools’ menu or

Tools toolbar.

Figure 9�6� Edge Rout icon

The Select Bit dialog will open showing the prole tab of the bits available (Figure 9.1). Select the desired

bit, depth and wether if it is going to be a single/multi-pass routing. Pressing the ‘OK’ button will conrm all

choices selected and the ‘Cancel’ button will close the Select Bit dialog without saving any of the choices made.

Close to the Edge

Full board edge routs will cause the workpiece to lose contact with the Board

Tracking Sensor on the CarveWright/CompuCarve Woodworking Machine. It is

recommended that the projects with edge routs be placed in a jig or auto-jigged. See

Chapter on Uploading for more information.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 218 219

Brak uwag

Craftsman CompuCarve 133.217540 Instrukcje Operacyjne Strona 85